M2716 Datasheet

The M2716 Datasheet is a vital document for anyone interested in vintage computing, embedded systems, or electronics restoration. It provides the comprehensive technical specifications for the M2716, a UV erasable programmable read-only memory (EPROM) chip that was widely used in the late 1970s and early 1980s. Understanding the information within the M2716 Datasheet is crucial for understanding how these early memory devices functioned and how to work with them today.

Decoding the Secrets of the M2716 Datasheet

The M2716 Datasheet serves as the ultimate reference guide for this particular EPROM chip. It meticulously details everything from the chip’s pinout (the arrangement and function of each pin) to its electrical characteristics, timing diagrams, and programming algorithms. Think of it as the manufacturer’s official user manual, providing all the necessary information for engineers and hobbyists to successfully integrate the M2716 into their designs. This detailed information allows for proper use and avoids damaging the EPROM. The datasheet ensures reliable operation by outlining the voltage requirements, timing constraints, and proper erasure procedures.

Datasheets are typically structured in a logical and organized manner. Here’s a general outline of what you might find within the M2716 Datasheet:

  • Absolute Maximum Ratings: Defines the limits beyond which the device could be permanently damaged.
  • DC Characteristics: Specifies the DC voltage and current parameters for proper operation.
  • AC Characteristics: Describes the timing requirements for reading and programming the memory.
  • Pin Configuration: Shows a diagram and description of each pin’s function.
  • Functional Description: Explains the internal workings of the M2716.
  • Programming Information: Details the algorithm and voltage levels needed to program the EPROM.

These datasheets are fundamental because they dictate how the M2716 can be used safely. For instance, the programming section gives the specific voltage and timing requirements for writing data to the memory array. Failure to adhere to these guidelines may result in corrupted data or even permanent damage to the chip. Additionally, the datasheet outlines the UV erasure process, including the recommended wavelength and exposure time necessary to fully erase the contents of the EPROM. The following table demonstrates the common timing parameters:

Parameter Symbol Min Max Unit
Access Time tACC 450 ns
Output Enable Time tOE 120 ns

For a deeper understanding of the M2716 and to ensure you’re using it correctly, it’s crucial to consult the full M2716 Datasheet. Refer to the original source document for all the specifications and guidelines needed for successful implementation.