The CR1220 battery, a small but mighty power source, is the heart of countless compact electronic devices. Understanding its capabilities and limitations is crucial for designers, hobbyists, and anyone working with these devices. The **CR1220 Datasheet** is the key to unlocking this understanding, providing the essential specifications and characteristics needed for proper application and reliable performance.
Decoding the Secrets of the CR1220 Datasheet
A CR1220 datasheet serves as the definitive technical document for this specific type of lithium coin cell battery. Think of it as the battery’s instruction manual, providing all the necessary information to ensure it’s used correctly and safely. It details everything from the battery’s physical dimensions and weight to its electrical characteristics, such as voltage, capacity, and discharge rates. The datasheet is the primary reference for determining if the CR1220 is suitable for a particular application and how to integrate it into a circuit effectively. It prevents common mistakes by designers such as reverse polarity, or even overloading the battery.
The datasheet usually follows a standard format, although the specific details and organization may vary slightly between manufacturers. However, all datasheets for CR1220 batteries will typically contain the following information. Common parameters you’ll find detailed in CR1220 Datasheets include:
- Nominal Voltage: Usually 3V, this is the standard operating voltage of the battery.
- Typical Capacity: Measured in mAh (milliampere-hours), this indicates how long the battery can supply a certain current before being depleted.
- Standard Discharge Current: The current the battery is designed to supply continuously.
- Operating Temperature Range: The range of temperatures within which the battery can operate safely and effectively.
- Dimensions: Specifically, 12.5 mm in diameter and 2.0 mm in height.
Furthermore, you will also find safety precautions such as handling, storage, and disposal. The datasheet often includes performance graphs illustrating the battery’s discharge characteristics under different conditions. Understanding these parameters is critical for ensuring that the battery meets the power requirements of the intended application and operates within safe limits.
CR1220 datasheets are essential for a variety of applications. For example,
- Engineers use them to design circuits for devices such as remote controls, watches, and medical implants.
- Hobbyists use them to power their DIY electronic projects, such as LED flashlights or sensor modules.
- Consumers use them to determine if a replacement battery is compatible with their device.
Want to dive deeper into the specifications and ensure you’re using the CR1220 battery correctly? Refer to the official datasheet for the CR1220 battery you are using for comprehensive details.