The CANADIAN 395W Datasheet is a critical document for anyone involved in solar energy, from installers and designers to homeowners considering a solar panel system. It provides detailed technical specifications and performance characteristics of the Canadian Solar CS3L-395MS solar panel, allowing users to make informed decisions about its suitability for specific applications. Understanding the information contained within the CANADIAN 395W Datasheet is essential for optimizing system performance and maximizing energy yield.
Decoding the CANADIAN 395W Datasheet A Guide to Essential Information
The CANADIAN 395W Datasheet is essentially a comprehensive profile of the solar panel. It outlines everything you need to know about its electrical and mechanical properties, including its power output, voltage, current, dimensions, weight, and operating temperature range. Think of it as a blueprint for the panel’s capabilities. These datasheets are crucial for:
- System design: Determining the number of panels needed and how they should be wired together.
- Performance prediction: Estimating the expected energy production of the system.
- Safety compliance: Ensuring the system meets relevant safety standards.
One of the most important sections of the datasheet is the electrical characteristics. This section details the panel’s performance under Standard Test Conditions (STC), which are a set of standardized conditions used for comparing different solar panels. Key parameters listed include:
- Maximum Power (Pmax): The peak power output of the panel.
- Open-Circuit Voltage (Voc): The voltage produced by the panel when no current is flowing.
- Short-Circuit Current (Isc): The current that flows when the positive and negative terminals of the panel are directly connected.
- Voltage at Maximum Power (Vmp): The voltage at which the panel produces its maximum power.
- Current at Maximum Power (Imp): The current at which the panel produces its maximum power.
These values are vital for selecting the right inverter and other system components.
Beyond electrical characteristics, the CANADIAN 395W Datasheet also provides valuable information about the panel’s physical attributes and operating conditions. This includes dimensions, weight, and temperature coefficients. Here’s an example of what you might find regarding temperature coefficients:
| Parameter | Value |
|---|---|
| Temperature Coefficient of Pmax | -0.37%/°C |
| Temperature Coefficient of Voc | -0.29%/°C |
| Temperature Coefficient of Isc | 0.05%/°C |
| This tells you how the panel’s performance will change as the temperature increases. The mechanical data helps with installation planning and ensuring the mounting structure can handle the panel’s weight and dimensions. The datasheet also usually includes warranty information. |
Now that you understand the importance of the CANADIAN 395W Datasheet, make sure to review the official documentation thoroughly. This will allow you to make informed decisions and ensure optimal performance of your solar panel system. The manufacturer’s provided datasheet contains all the critical technical specifications you need!